Single Convoluted Air Spring.
Designed for to slip over your Factory/Performance Struts. (Pressure tube must be less then 2.14 in Diameter)
Bags made from Synthetic rubber to be resistant against Oil and breakdown that will ruin Natural Rubber.
Available in 1/4 NPT Ports
MADE IN THE USA!
NOTE:The brackets required to install these bags are 2 Flat Plates (Upper and Lower), Bearing Kit (You also can use your factor bearing plate for this application).
This bag is designed for the Heavy Weight Vehicles Including:
The larger diameter allows for the bag to pick up higher at the same pressure and same at lower pressure then the standard aero sport.