Providing 200PSI and a 100% duty cycle, VIAIR's 480C Dual Performance Value Pack is an ideal air source solution for any air suspension kit, industrial application, air horns or off-road pneumatic needs. Each Dual Pack includes two VIAIR 480C Pewter, Chrome or Stealth Black air compressors, two heavy duty 40-amp relays, a 165 PSI cut-on, 200 PSI cut-off pressure switch, and remote mount filter assemblies with mounting hardware.

Note: Use thread sealant for proper installation.
Teflon tape is not recommended. Properly sealed,
recommended torque is 12 to 15 ft. lbs.

VIAIR WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 100% @ 100 PSI (50% @ 200 PSI)
- Max. Working Pressure: 200 PSI
- Max. Air Tank Size: 10.0 Gallon
- Max. Amp Draw: 44 Amps
- Ingress Protection Rating: IP67
- Dimensions: 10.87"L x 4.2"W x 6.75"H (Each Unit)
- Net Weight: 22.10 lbs.

PSI	CFM	A	BAR	LPM	A
0	3.53	25	0	100.0	25
10	3.10	28	1.0	86.5	29
20	3.00	31	2.0	81.4	33
30	2.86	33	3.0	76.8	35
40	2.75	35	4.0	72.7	37
50	2.64	36	5.0	67.6	39
60	2.55	37	6.0	61.2	41
70	2.43	39	7.0	55.3	42
80	2.26	40	8.0	50.1	44
90	2.12	41	9.0	45.0	44
100	1.97	42	10.0	40.6	43
110	1.84	43	11.0	36.8	41
120	1.72	44	12.0	32.4	40
130	1.59	44	13.0	28.0	37
140	1.49	43	14.0	24.8	36
150	1.38	42
160	1.29	41
170	1.18	40
180	1.09	39
190	0.97	37
200	0.90	36	* Supply Voltage: 13.8 Volts

2.5 Gallon Tank	Fill Rate
0 to 200 PSI	2 min. 22 sec. (± 10 sec.)
165 to 200 PSI	38 sec. (± 05 sec.)
5.0 Gallon Tank	Fill Rate
0 to 200 PSI	5 min. 02 sec. (± 10 sec.)
165 to 200 PSI	1 min. 25 sec. (± 05 sec.)
10.0 Gallon Tank	Fill Rate
0 to 200 PSI	10 min. 30 sec. (± 15 sec.)
165 to 200 PSI	3 min. 10 sec. (± 10 sec.)

User Manual
Dimensional Drawings
Wiring Diagram