Air House 7 Air Bag
(0 review)

125.00 125.0 USD 125.00


  • Port Size

This combination does not exist.

Shipping Weight: 5 lb
Brand: Universal Air
Manufacture Part Number: 02-AH7

Currently Available in limited production

Air House 7

Air House 7

By Universal Air

Similar to your Favorite Air House 2, Just Larger!

The Air House 7 was design to perform similar to our air house 2, just more capacity.  Have a Heavy Vehicle?  The Air House 7 will lift it at about 25% less pressure.  The added benefit is the Air House 7 will provide a softer ride at the same height compared to the Air House 2.  With a slim 7" Max diameter it will fit in all of your applications where a "standard" 2600 lbs. bag will fit with room to spare.

Best suited for your Control Arm Front suspension, or Link rear system where the bags are mounted on the bar to take advantage of leverage.

No Center Ring

Single bellow construction greatly increases the stability of the air spring allowing for increased angle and load applications without the banana center kick out.

Maximum Outside Diameter when compressed is 7" and will shrink down to about 6 5/8" when inflated.  Minimizing frame cutting in most applications. 

With the added stability there is a very noticeable reduction in vehicle "sway" compared to a typical double convoluted.


2" Collapsed Height

8.5" Extended Height

7" Max Diameter

Available in 1/4", 3/8" and 1/2" NPT

3.25" - 5" Optimum Ride Height

Up to 3300 Lbs. Force at 115 PSI

Heavy Duty Thick Rubber Construction

615 PSI Tested Burst Pressure

Front or Rear Installation

Straight or Angled Installation

Industry Standard Bolt Pattern 

Machined 6061 Aluminum Caps


Port Size 1/4 or 3/8 or 1/2