Ultra-Light Duty Onboard Air System

Ultra-Light Duty Onboard Air System (12V, 105 PSI Compressor, 1.0 Gal. Tank)

Ultra Light Duty Onboard Air System can be used to pressurize the included 1.0 gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provides a reliable smaller volume, in a cost effective package.

Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs.
Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.

Features & Specifications

Features	Specifications
– 1.0 Gallon VIAIR Air Tank	– 12-Volt
– 98C VIAIR Air Compressor	– Permanent Magnetic Motor
– Omega Bracket with Mounting Hardware	– Duty Cycle: 10% @ 100 PSI
– Pressure Switch (85 PSI on, 105 PSI off)	– Max. Working Pressure: 105 PSI
– 40-amp Relay	– Max. Amp Draw: 12 Amps
– 145 PSI Safety Valve	– Ingress Protection Rating: IP54
– T-Fitting: 1/4” (M) x 1/4″ (F) x 1/8” (F)	–
– T-Fitting: 1/4” (M) x 1/4″ (F) x 1/4” (F)	–
– 1/4” Drain Cock	–
– 1/4” Compression Fitting	–
– 1/4” Plug (M)	–
– (2) 1/4” (M) NPT to 1/8” (F) BSP	–
– 20ft. 16 Gauge Wire with Inline Fuse Holder	–
– Accessory Airline	–
– Electrical Connections	–
*All Fittings are NPT rated unless otherwise noted.*	Wiring harness NOT included.

Performance Data

PSI	CFM	A	BAR	LPM	A
0	1.53	7	0	43.5	7
10	1.00	9	1.0	28.0	9
20	0.95	10	2.0	25.5	11
30	0.90	11	3.0	22.7	11
40	0.83	11	4.0	20.7	12
50	0.77	12	5.0	18.3	12
60	0.72	12	6.0	16.3	12
70	0.65	12	7.0	13.7	12
80	0.60	12	8.0	11.7	12
90	0.54	12	9.0	10.0	11
100	0.48	12

* Supply Voltage: 13.8 Volts

Fill Rates

1.0 Gallon Tank	Fill Rate
0 to 105 PSI	1 min. 40 sec. (± 10 sec.)
85 to 105 PSI	30 sec. (± 05 sec.)