200 PSI Ultra Duty Onboard Air System

https://www.universalair.com/web/image/product.template/299/image_1920?unique=d3c1cef
(0 review)

200 PSI Ultra Duty Onboard Air System (12V, 200 PSI Compressor, 2.5 Gal Tank)

$ 724.95 724.95 USD $ 724.95

$ 724.95

    This combination does not exist.

    Contact Us

     

    Barcode: 818114002106
    Shipping Weight: 34 lb
    Internal Reference: VA-20001
    Brand: Viair
    Manufacture Part Number: 20001

    200 PSI Ultra Duty Onboard Air System (12V, 200 PSI Compressor, 2.5 Gal Tank)

    VIAIR’s Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor,2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.

    Please Note: Pressure Switch w/Relay (PNs 90110, 90111, 90113, 90118) is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure.

    Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.

    Features & Specifications

    Features
    		Specifications
    – 2.5 Gallon 200 PSI VIAIR Air Tank– 12-Volt
    – 480C Chrome VIAIR Air Compressor
        w/Thermal Overload Protector    		– Permanent Magnetic Motor
    – Tire Inflation Gun with 200 PSI Gauge– Duty Cycle: 100% @ 100 PSI
    – Dash Panel Gauge with ON/OFF Switch– Max. Working Pressure: 200 PSI
    – 30ft. Coil Hose with Quick Connects– Max. Amp Draw: 23 Amps
    – Pressure Switch (165 PSI on, 200 PSI off)– Ingress Protection Rating: IP67
    – Reducer: 1/8” (F) to 1/4” (M)–
    – Reducer: 3/8” (F) to 1/4” (M)–
    – 1/4” Quick Connect Stud (F)–
    – 1/4” Quick Connect Coupler (F)–
    – 1/4” 250 PSI Safety Valve–
    – 1/4” Drain Cock–
    – (3) 1/4” Compression Fittings–
    – 20ft. 12-Gauge Wire with Inline Fuse Holder–
     – 4” Strip of Continuous Grommet Material–
    – Accessory Airline–
     – Electrical Connections–
    All Fittings are NPT rated unless otherwise noted.

    Performance Data

    0
    		1.86
    		0
    		52.710
    10
    		1.7510
    		1.047.513
    201.5912
    		2.043.215
    301.5214
    		3.040.716
    401.4515
    		4.038.118
    501.4116
    		5.035.318
    601.3317
    		6.032.619
    701.2618
    		7.030.020
    801.2018
    		8.027.022
    901.1319
    		9.025.022
    1001.0719
    		10.022.321
    1100.9920
    		11.020.121
    1200.9321
    		12.018.321
    1300.8823
    		13.016.020
    1400.8222
    		14.014.019
    1500.7522



    1600.7121


    1700.6721


    1800.6121


    1900.5520


    2000.5119


    * Supply Voltage: 13.8 Volts

    Fill Rates

    2.5 Gallon TankFill Rate
    0 to 200 PSI5 min. 02 sec. (± 10 sec.)
    165 to 200 PSI1 min. 30 sec. (± 05 sec.)
    35″ x 12.5″Fill Rate
    0 to 30 PSI6 min. 15 sec. (± 15 sec.)
    15 to 30 PSI3 min. 15 sec. (± 10 sec.)
    37″ x 12.5″Fill Rate
    0 to 30 PSI7 min. 00 sec. (± 15 sec.)
    15 to 30 PSI3 min. 40 sec. (± 10 sec.)


     
     

    To read our complete installation article. Click Here.

    NOTE: The installation instructions in this video are only applicable to single-compressor onboard air systems (Part Numbers: 10003, 10005, 10007, and 20001). For other OBA’s, the wiring is different. If you have installation questions, please contact our customer service team.

     

     




    Share