Dual 380C Onboard Air System (200 PSI · 2.54 CFM · 44 Amp · 12V · 2.5 Gal. Tank)
VIAIR’s Dual 380C Onboard Air System is a pre-packaged compressed air solution that provides two 380C, 100% duty cycle compressors, a 2.5 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. lbs.
Features & Specifications
– 2.5 Gallon 200 PSI VIAIR Air Tank | – 12-Volt |
– (2) 380C VIAIR (Stealth Black or Pewter) Compressors w/Thermal Overload Protectors | – Permanent Magnetic Motor |
– 30ft. Coil Hose with Quick Connects (20013)or | – Duty Cycle: 100% @ 100 PSI |
– 30ft. Black Inside Braided Coil Hose (20014) | – Max. Working Pressure: 200 PSI |
– Tire Inflation Gun with 200 PSI Gauge | – Max. Amp Draw: 44 Amps |
– 0-220 PSI Pressure Regulator | – Ingress Protection Rating: IP67 |
– Sealed Pressure Switch (165 PSI on, 200 PSI off) | – |
– 200 PSI Illuminated Dash Panel Gauge | – |
– (2) 40-amp Relays | – |
– Inline Fuse Holder | – |
– 1/4” Quick Connect Coupler (M) | – |
– 1/4” 250 PSI Safety Valve | – |
– 1/4” Drain Cock | – |
– (2) 1/8” BSP to 1/4” NPT | – |
– (3) 1/4” Compression Fittings | – |
– 5 Pc. 1/4” NPT Plugs Kit | – |
– 6-Port Billet Manifold with Mounting Bracket (1/4”) | – |
– (2) 20ft. 1/4” Air Line Included | – |
– Electrical Connections | – |
All Fittings are NPT rated unless otherwise noted. | Wiring harness NOT included. |
Performance Data
PSI | CFM | A | BAR | LPM | A |
0 | 2.54 | 28 | 0 | 72.0 | 28 |
10 | 2.42 | 29 | 1.0 | 67.0 | 30 |
20 | 2.30 | 31 | 2.0 | 61.7 | 33 |
30 | 2.17 | 33 | 3.0 | 57.5 | 34 |
40 | 2.07 | 34 | 4.0 | 53.5 | 36 |
50 | 1.95 | 35 | 5.0 | 49.8 | 37 |
60 | 1.87 | 36 | 6.0 | 46.4 | 39 |
70 | 1.78 | 37 | 7.0 | 43.3 | 41 |
80 | 1.70 | 38 | 8.0 | 40.3 | 43 |
90 | 1.61 | 39 | 9.0 | 37.2 | 44 |
100 | 1.54 | 41 | 10.0 | 34.5 | 42 |
110 | 1.46 | 42 | 11.0 | 31.8 | 41 |
120 | 1.40 | 43 | 12.0 | 29.2 | 40 |
130 | 1.32 | 44 | 13.0 | 26.6 | 38 |
140 | 1.25 | 43 | 14.0 | 23.7 | 37 |
150 | 1.19 | 42 | |||
160 | 1.12 | 41 | |||
170 | 1.06 | 40 | |||
180 | 0.99 | 39 | |||
190 | 0.93 | 38 | |||
200 | 0.86 | 37 |
* Supply Voltage: 13.8 Volts
Fill Rates
2.5 Gallon Tank | Fill Rate |
0 to 200 PSI | 3 min. 13 sec. (± 10 sec.) |
165 to 200 PSI | 53 sec. (± 05 sec.) |
37″ x 12.5″ | Fill Rate |
0 to 30 PSI | 5 min. 00 sec. (± 15 sec.) |
15 to 30 PSI | 5 min. 00 sec. (± 15 sec.) |
40″ x 15.5″ | Fill Rate |
0 to 30 PSI | 5 min. 25 sec. (± 15 sec.) |
15 to 30 PSI | 2 min. 40 sec. (± 10 sec.) |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.