463 W Highland Ave, San Bernardino, CA 92405
800-864-2470 or 909-886-9491
Mon. - Fri. 09:00 am - 06:00 pm PST

150PSI High speed 2on2 (07-11 Jeep JK)

https://universalair-uas.odoo.com/web/image/product.template/251/image_1920?unique=1fce8be

150 PSI High Speed 2 On 2's JK (2007~2011) Two 400C's On 2.0 Gal. Tank, w/Crossmember Bracket

$ 909.95 909.95 USD $ 909.95

$ 909.95

    This combination does not exist.

    Contact Us

     

    150 PSI High Speed 2 On 2's JK (2007~2011) Two 400C's On 2.0 Gal. Tank, w/Crossmember Bracket

    Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high speed onboard air system that provides 150 PSI maximum pressure. Available as a model-specific bolt-on application for 2007-2011 Jeep JK with a crossmember mounting bracket – 2on2 systems all come complete with an easy-to-install wiring harness and manifold to make wiring and plumbing the system straightforward. Note: 2on2 Bolt-On Platform systems in model specific applications for 2007-2011 Jeep JK are equipped with a crossmember mounting bracket.

    Specifications

    Specifications
    		Pre-Installed
    		Included-in-Kit
    – 12-Volt– 2.0 Gallon 5-Port Air Tank– Crossmember Mounting Bracket
    – Permanent Magnetic Motor– (2) 400C Air Compressors w/Thermal Overload Protectors– 60-amp Fuse & Fuse Holder
    – Duty Cycle: 33% @ 100 PSI– (2) 1/4” Stainless Steel Braided Leader Hoses– 80-amp Relay
    – Max. Working Pressure: 150 PSI– (2) 1/4” JIC Fittings on Leader Hoses– (2) 1/4” BSP Adapters for Air Lockers
    – Max. Amp Draw: 59 Amps– 1/4” NPT Swivel to 1/4” NPT Swivel– T-Fitting 1/4″ NPT F x 1/4″ NPT F x 1/4″ NPT M
    – Ingress Protection Rating: IP67– T-Fitting (Remote Mount Filter)– 1/8″ to 1/4″ NPT Reducer
    – Ingress Protection Rating: IP67– 1/4” NPT Drain Cock– Wiring Harness with Delphi Connectors
    – Dimensions: 18.5″L x 5.9″W x 13.5″H– Sealed Pressure Switch with Delphi Connectors
    (110 PSI On, 145 PSI Off)    		– Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket
    – Net Weight: 30 lbs.(2) Loomed Compressor Wires Terminated
    with Delphi Connectors    		– Billet 1/4” NPT x 6-Port Manifold and Mounting Bracket

    		– Inline Fuse Holder with Fuse– Air Filter Housing with Installed Element

    		– 1/4” NPT Safety Valve– (2) Replacement Air Filter Elements

    		– (4) 1/4” NPT M Recessed Plugs– Dash Panel Air Pressure Gauge (0-160 PSI Illuminated)


    		– Air Pressure Regulator


    		– 15ft. DOT Air Line

    Performance Data

    PSICFMABARLPMA
    0
    		4.5539
    		0
    		129.039
    10
    		4.1840
    		1.0115.641
    20
    		3.9642
    		2.0106.545
    30
    		3.7445
    		3.096.647
    40
    		3.5046
    		4.086.450
    50
    		3.2548
    		5.078.453
    60
    		3.0050
    		6.070.858
    70
    		2.8352
    		7.064.057
    80
    		2.6055
    		8.057.554
    90
    		2.4659
    		9.050.652
    100
    		2.2857
    		10.043.750
    110
    		2.1255



    120
    		1.9753



    130
    		1.8052



    140
    		1.6051



    150
    		1.4849



    * Supply Voltage: 13.8 Volts

    Fill Rates

    2.0 Gallon TankFill Rate
    0 to 145 PSI1 min. 00 sec. (± 05 sec.)
    110 to 145 PSI20 sec.(± 03 sec.)
    37″ x 12.5″Fill Rate
    0 to 30 PSI3 min. 25 sec. (± 10 sec.)
    15 to 30 PSI1 min. 40 sec. (± 05 sec.)
    40″ x 15.5″Fill Rate
    0 to 30 PSI3 min. 35 sec. (± 10 sec.)
    15 to 30 PSI1 min. 45 sec. (± 05 sec.)


     
     
    Using two high output compressors mounted to a 2.0 gallon, 5-port air tank all required components are included to allow the installation of a high speed onboard air system that provides 150 PSI maximum pressure. 

    WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

    Share